A Scrapbook made from a Notebook bound in decorative Book Cover

1. Cut a piece of decorative book cover material 3cm larger all the way around the opened notebook. Apply a coat of glue onto the cover of the notebook and let it dry for approx. 5-7 min.

2. Attach the decorative book cover onto the glue-covered opened notebook. Smooth out to achieve an even surface.

3. Turn over the notebook. Turn all the pages of the book to one side, exposing the hard cover of the actual book. Use a pencil to mark (on the inside of the hard side) the area where you want the turn-up of the decorative book cover to finish. Repeat on the other cover of the book.

4. Mark a line at an angle 3mm from each corner (onto the decorative book cover).

5. Measure the spine of the book and cut an incision on each side of this – at both the top and the bottom. Then cut a wedge diagonally, so that later you can easily turn up the decorative book cover.

6. Trim the flap for the book spine – approx. 5mm from the edge.

7. Apply glue onto the flap with a brush and bend it round, attaching it to the inner side of the book spine. You may use the opposite end of the brush to help bending the flap.

8. Decorate the bound notebook with masking tape, a printed photo, a foam rubber face and text with self-adhesive foam rubber letters using your imagination.